505-0008 Twinflex Pro² 8 Zone Bi-Wire Conventional Fire Alarm Panel

The panel features a 500 event log, day/night mode, alarm confirmation and delay programming options that can be configured using the keypad or via PC driven OSP software. The TwinflexPro² panel is no longer only compatible with Fike’s Twinflex devices, with the addition of our conventional zone card a 4 or 8 zone panel can now be configured to accept conventional devices on zones 5 to 8. Unlike most conventional fire alarm systems, which require separate pairs of cables for detector zones and sounder circuits, the Twinflex system requires one 2-core screened cable for each zone to accommodate both detection devices and sounders when using Twinflex devices.
n
n
n
nKey Features
n✸ 4 line x 20 character LCD display
n✸ Ability to differentiate between smoke detector, heat detector or a manual call point alarms
n✸ Alarm confirmation feature
n✸ Available in 2, 4 and 8 zone panel versions
n✸ RS485 connection to up to 8 repeater panels
n✸ Highlighted selection menu
n✸ Event log storing up to 500 events
n✸ 3 enhanced test modes
n✸ Allows detectors and sounders to be installed on the same pair of wires
n✸ Up to 32 devices per zone
n✸ Built-in EOL capability in all devices
n✸ 7 modes of detection
n✸ Zone can be configured to day/night detection mode
n✸ Delay programming options
n✸ 4 or 8 zone panel can now be configured to accept conventional devices on zones 5 to 8 with the optional conventional zone card
n✸ Accommodates 2 x 12v 3.2Ah batteries (sold separately)
n✸ Optional extended battery box with capacity for 2 x 12V 7.0Ah batteries
n