RKNT500 Natural Knotting 500Ml

• For application to bare wood. Clean knots prior to priming/painting. To prevent discolouration of paint film. Use under oil-based and knotting-compatible water-based coatings.
n• Suitable for Bare wood
n• The surface must be clean, bare and sanded smooth. Clean off any excess resin using white spirit and allow to dry. A heat gun may be used (taking care not to char the wood) to draw-out •
n excess resin, then scrape away. If there are cracks or holes around the knot, fill with Rustins Wood filler, allow to dry, and sand smooth prior to applying Knotting.
n• Using a brush apply Knotting liberally over the knot and surrounding area. Apply 2 coats. Do not sand after application knotting. Allow 1 hour between coats. Allow 1 hr after final coat • • before applying primer.